One Release Signature, Every Club
Release timing doesn't reset when you switch clubs, but how much it matters does — a driver with a released-late signature behaves differently than a wedge with the same tendency. Below is how that one signature reading gets applied across the bag.
Start with the club giving you the most trouble, or work through the whole set if you're booking a full-bag session.
Driver Fitting
No club magnifies a mistimed release like the driver — the longest shaft in the bag and the fastest clubhead speed you'll ever generate. Getting the release window right here is usually the single biggest gain in carry and dispersion you'll find.
Your Release, Logged on Every Swing
The synced camera and wrist sensor log the exact moment your wrists uncock relative to impact, alongside standard launch numbers like ball speed, spin, and attack angle — with your current driver and every demo head we test.
From there we map the interaction: is your release firing early, adding loft and spin at contact? Is it firing late, delofting the face and pulling shots left? Every recommendation traces back to a specific release number from your own session, not a guess about how a shaft "plays."
What Actually Changes in a Driver Fitting
Kick Point & Release Timing
Where a shaft loads and unloads energy interacts directly with your own release timing. Matching the two closely produces a more repeatable strike than chasing flex letter alone.
Loft & Face Angle
Adjustable hosels let us dial loft in half-degree steps. An early release often calls for less static loft; a late release frequently needs more to avoid a low, weak flight.
Shaft Weight
Weight shapes swing timing more than the flex label alone. We test across weight classes to find the combination with the most repeatable release.
Head Design & MOI
Higher-MOI heads resist twisting on mistimed strikes; lower-MOI heads often suit players whose release is already highly repeatable.
Length
A shorter, better-timed driver frequently beats a longer one on center-strike percentage, which usually outweighs a few extra yards of theoretical distance.
Grip Size & Texture
Grip diameter and texture change how freely your hands release through impact, which can quietly shift face angle at contact. We check both on every driver fitting.
What a Release-Timed Driver Fitting Can Fix
The Slice
An early release often leaves the face open at impact. The right shaft profile and loft combination can reduce curvature meaningfully while you work on the underlying pattern.
Low, Weak Shots
A late release can deloft the face at contact, producing a flight that falls short of its potential. Adjusting static loft and CG placement typically resolves this.
Ballooning in the Wind
Excess spin from a mistimed release sends shots up and back, exposing the ball to wind. A stiffer, lower-spin shaft matched to your release timing flattens the flight.
Inconsistent Strike Location
If your dispersion pattern shows strikes scattered across the face, a release timing mismatch is a common cause — correcting the shaft profile can shrink that pattern significantly.
Fairway Wood Fitting
Fairway woods ask more of your release than almost any other club — they get hit off a tee and off tight turf, often on the same hole. A release that's shallow enough for the fairway but not so shallow it kills your tee-shot distance is a narrower window than most golfers realize.
Shallower Attack Angles Change the Release Math
Most golfers deliver a fairway wood with a shallower, more sweeping attack angle than a driver, which shifts when the release naturally wants to happen. A shaft profile that felt great in the driver fitting can feel completely different once we drop into fairway wood attack angles.
We capture release timing separately for fairway wood swings rather than assuming driver data transfers directly, since the two rarely match exactly.
Head and Shaft Choices That Follow Your Release
Sole Design
A wider, more rounded sole forgives a release that arrives slightly late off tight turf; a shallower sole suits players whose release is already consistent through the ball.
Loft Spread
We map your fairway wood loft against your release-matched driver loft so there's no distance overlap or gap between the two.
Shaft Profile
Fairway wood shafts often need a different kick point than a driver shaft to match the same golfer's release, even at similar overall weight.
Hybrid Fitting
Long irons ask for a release that most golfers simply don't have consistently. A hybrid built around your actual release timing, instead of a swapped-in head with the same old shaft, is usually the difference between a club that sits in the bag and one that gets used.
Filling the Gap Your Long Irons Left Open
A hybrid built to match your release timing launches higher and holds greens more reliably than a long iron struck with a mistimed release. We measure exactly where your long-iron release starts breaking down, then set the hybrid's loft and shaft to cover that gap cleanly.
We also check the hybrid against your fairway wood data, since the two clubs often overlap in distance if their release timing isn't considered together.
Head Style and Shaft Choices That Follow Your Release
Iron-Style vs. Wood-Style Heads
Iron-style hybrids suit a release timing closer to your long irons; wood-style heads suit a release closer to your fairway woods. We test both against your data rather than assuming.
Shaft Length & Weight
Matching the hybrid's shaft weight to your iron set, not your fairway wood set, keeps release timing consistent as you move through the bag.
Set Placement
We map exactly where the hybrid slots in against your irons and fairway woods, so it fills a real gap instead of duplicating a distance you already cover.
Iron Fitting
Your release timing doesn't stay fixed across a full set — it shifts as shaft length changes from wedge to long iron. Most fittings ignore that shift entirely. Ours is built around tracking it club by club.
The Same Shaft Flex Plays Differently at Every Length
A shaft that matches your release timing perfectly in a 7-iron often plays too soft in a 4-iron and too stiff in a wedge, simply because length changes how quickly the shaft loads and unloads. We track release timing at both ends of the set, not just the middle iron most fittings default to.
The result is a set where your release feels the same swing to swing, instead of "whippy" in the long irons and "boardy" in the short ones.
Set-Wide Changes That Follow Your Release
Shaft Profile Across the Set
Rather than a single flex letter applied to every iron, we tune the profile so release timing stays consistent from long iron to wedge.
Dynamic Lie Angle
Lie angle checked at impact, not at address, since a mistimed release can shift how the sole interacts with the ground even when static lie looks correct.
Length & Gapping
Set length is mapped against carry-distance gapping, so no two irons compete for the same yardage once release timing is accounted for.
Wedge Fitting
Your release timing on a full swing and your release timing on a 40-yard pitch are rarely the same. Wedge fitting has to account for both, which is why bounce and grind alone don't tell the full story.
Two Different Timing Windows, One Club
On full wedge swings, release timing tends to mirror your short irons. On shorter, more controlled shots — pitches, chips, bunker play — the release window compresses significantly, and a bounce or grind that works for one can fight the other.
We capture both scenarios during a wedge fitting, then choose bounce, grind, and loft spacing that hold up across the full range of shots you actually play.
Bounce, Grind, and Gapping That Follow Your Release
Bounce & Grind
Higher bounce forgives a release that arrives a touch early through impact; lower bounce and heel/toe relief suit players with a more consistent, later release.
Loft Gapping
Loft spacing is set against your actual carry gaps between wedges, so no yardage window gets left uncovered.
Turf Conditions
We test against turf firmness typical of Piedmont-area courses, since bounce that works on soft ground can dig on firm, dry fairways.
Putter Fitting
Release in the putting stroke works differently than in the full swing — it's about how much the face rotates through impact, not wrist uncock. Getting that rotation matched to the right putter is often the fastest three-putt fix in the bag.
Face Rotation Is Its Own Kind of Release
An arcing stroke naturally rotates the face open on the way back and closed through impact — a face-balanced putter with more toe hang supports that motion. A straighter, less rotating stroke usually pairs better with a face-balanced or low toe-hang design that resists rotation instead.
We track stroke arc and face rotation with a dedicated capture system, then match toe hang, length, and lie to how your particular stroke actually releases the face.
Balance, Length, and Lie That Follow Your Stroke
Toe Hang
High toe hang suits an arcing stroke with more natural face rotation; face-balanced heads suit a stroke that stays squarer through the ball.
Length
Length changes eye position and posture, both of which shift how much the face rotates during the stroke — we test in half-inch increments against your actual data.
Lie Angle
Lie angle set at your natural address posture keeps the face square at setup, so rotation during the stroke is the only variable left to fit.
Fit the Whole Bag to Your Release
A full-bag session runs the release-timing capture once and applies it across every club category, so you leave with one delivery report instead of a different reading for each club.